Most items listed on this page sell fast !! Below is all that is left. If you have anything iceboat related you want to sell. EMAIL ME

Scroll down below the Okoume for the latest items.

For Sale


Okoume Plywood 3mm and 7mm imported from greece, better quality than any of the newer Okoume I have ever seen. 3mm/$40 sheet
7mm/$50 sheet
Elk Rapids, Mi jackandkellyjacobsjr@yahoo.com


February 7th 2009

For Sale: Modern DN, turnkey platform, max width wedge hull, kerf cut carbon/glass/wood composite spar(same attributes as glass Whip), FO1 sail, 150-190 lb rated plank w. Sarns chocks, Sarns plates, SS inserts ($optional),wood/glass boom with tapered mainsheet and quick change block system w. hull deck, choice of tillers, all related bags, boxes, ice stands, no faults, no excuses $2950 acat40@gmail.com
Photobucket Photobucket

January 22nd 2009

DN Parts for Sale
440c Insert Runners, 3/16"
Hardwood plywood-bodied 440c 3/16" 36" insert runners 90 degrees angle with 21" crown. Built by Ron Sherry in the mid 1990's Sharpening, profiling, and edge straightening by Steve Duhamel from Northwind Iceboats in fall 2009, used only @ 2010 Centrals this season Edge straightness ground and measured to .003" Carbon side bodies Milled aluminum Sarns stiffeners for deep chocks
Purchased for $1200 in 2008, asking $850
Shipping available at cost or free delivery to the NA's in February. Reasonable offers considered

Also DN Plank for ~170 pound skipper Polish-built aero plank with single bolt mounting. Stud plates can be added for US-style plank mounting Epoxied-on 8" Jablonski chocks with Struble runner bolts and pressed in jam nut.
This plank is too soft for me. Could be stiffened with added glass if desired.
Asking $750 Shipping available at cost or free delivery to the NA's in February. Reasonable offers considered
Contact Ben Shaevitz DN US 5395 basmoss1 at hotmail dot com
Photobucket

Photobucket

Photobucket


December 10th 2009

Circa 1985 class design hull, WEST system const. Located Winnipeg / Caddy Lake, MB Used twice, always stored inside Very well made, 57 lb bare hull w steering Maple / oak plank deflects 1 9/16 with 180 lbs. Rachet mainsht. block, anodized alu mast, spruce boom Boston sail, Sarns hdw , custom (P.U. truck) rack included Blue snow skis (in picture) may be available on request Will deliver to n.MN for approx. $150.- up to 350 mi. Contact Derek at 204 832 8118 / 204 349 2391
Photobucket Photobucket Photobucket

December 9th 2009

Nite ice boat for sale. Made by S & R. Metal flake green. Includes sail, mast, runner plank, and runners. All in good shape. New sail 4yrs ago.
$5000 Email to njandth@yahoo.com
Photobucket

October 24th 2009

DN Iceboat forsale recent refinsh and sorted. Boston Sail and Sarns Hardware. Mid-70s vintage, great cruiser and excellant shape. $1795. David @ 810-522-1673 or 517-515-5772.
Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket



October 24th 2009

Icetender. Stainless blades and multiple windsurf sails. $350.00 Email Rob
Photobucket


October 24th 2009
Jack Jacobs built C-Skeeter "OUTLAW"
Wood boat with automotive paint. Beautiful Finish and great boat.
Roll bar for safety. Rear steering arm so you can steer while pushing the boat.
Winch for sheeting, Weight mounts on the springboard to adjust steering weight for different racing/surface conditions.
No weights need to be used, it handles beautifully, I just wanted the option. Everything is in great shape, just minor scuffs from storage. Sarns skates,
Harken hardware, custom interior. Boom sheets all the way down to the deck.
$4,900 You can buy this boat using a Visa/MC through Paypal contact us for info.

Email ME
Below is the video of it being assembled in the fall

Also some photos
Photobucket

Photobucket

Photobucket





October 23rd 2009

Set of heavy duty runners for sale. Two 36" runners with matching mounting brackets and a 30" steering runner, standard 1" widths. Asking $500 for the set.
Contact Chris
cwjonesy@gmail.com
319-961-1101
Photobucket Photobucket


October 23rd 2009

blade
C Class Skeeter iceboat FOR SALE $4,500 20ft mast 21ft hull including springboard Foot pedal & wheel steering Two sails, one full, one blade Covers for hull, mast, plank, boom & sails Royal Blue Awl Grip paint & custom graphics 1 set of runners w/sharpening jig Toolbox with all tools necessary for boat Please contact Chris at (631) 466-6442 or cgeminski@shvillagephoto.com Boat is located on Long Island, NY


October 22nd 2009

1954 2 seat skeeter for sale. Hull #7. Totally rebuilt with new Doyle sail and new rigging. Mooring cover. $2450.00 Call Dane @ 313 670 8704 for more pix
PhotobucketPhotobucket


October 22nd 2009

dn

I have DN for sale that I build 4 yrs ago.Basswood, Sarns hardware, Bullnose runners black anodized,Kenyon mast black anodized, Harken block, North sail,a very flexible plank for a 140 to 160 person, asking $1700 obo.
fiberglass mast with aFO-1 sail asking $2400 OBO
Grand Rapids MI
616 455 1836 ask for Bruce


October 22nd, 2009

Nite complete with mast, full length Sunbrella cover and custom graphics. Includes new custom made galvanized 3 boat trailer complete with equipment box. 150 miles on trailer since it was made. All stored indoors in the off season. $6500.00
Contact me at Menomonie@mail.com or 715-790-3987 nite


October 22nd 2009


For Sale J14 #13
Built 2000, traditional West system construction
with pine/balsa core fuselage. Sarns Hardware,
aluminum mast, Doyle Sail. Modified: 12' plank moved
13" aft. Currently prepped for paint job of new owners choice.
View it in this youtube video
Youtube video of J14 #13
Price $2500 If you have any questions please call me at 231-670-3000
Ed Tenkel
J13 #13 


October 20th 2009



J-14 #88, PUFF complete boat ready to sail,
See construction pics in photo section under J14 #88 HERE
$5400 Harrison, Mich. icebite1@yahoo.com

Photobucket 




18 FT Alumnum Mast Used 18 ft mast 150.00 GrandRapids MI weshred@ triton.net


Many more iceboats for sale click
HERE






Wanted

Coming soon.